Tag: motor controller

Extension Wires & Motor Controllers

Motor controllers need to be plugged in close to the cortex, and 2-wire extensions should be used to reach motors far away. You can use 3-wire extension cables in place of 2-wire extensions if needed.

Share this post:

Motor Ports 1 & 10 – Way Different!

Today I want to relay some more useful information from the awesome jpearman on the VEX Forum regarding motor ports 1 & 10 that will affect the way you’ll want to allocate ports in your robot design. I seem to be writing encyclopedic posts lately, so here’s today’s table of contents: Inside the cortex: 2 CPUs […]

Share this post:

© 2018 Renegade Robotics

Theme by Anders NorenUp ↑